ICP DAS - Terminal Boards, Relay Boards
ICP DAS, established in 1993, focuses on innovation and improving the industrial automation technology. With the wide spread of internet and the extension of household and entertainment, it becomes a trend to integrate data acquisition, industrial control, and communication as one complete system. The embedded-control system has also become the focal point of research and application.
ICP DAS strives for advanced remote I/O controllers, distributed I/O modules, and I/O data acquisition boards. To provide a total industrial automation solution and a complete after service, recently, ICP DAS enthusiastically endeavors to develop a series of programmable automation controller, webrelated products and motion-control systems.
|
Termination board for current input module 8-channel Digital Output and 8-channel Counter Input Board, including DB-8820 Daughterboard and a CA-2520D Cable 8-channel Digital Output and 8-channel Counter Input Board, including two CA-090910-A Cable and two CA-3813 Connector Casing Termination board for pulse input module (RoHS), up to 50V Photo-isolated Universal Snap-on Wiring Terminal Board Universal Snap-on Wiring Terminal Board for PISO-PS410 and PISO-PS810 DIN-Rail Mountable I/O Connector Block with 68-pin SCSI II Female Connector (RoHS) I/O Connector Block (Pitch= 381 mm) with DIN-Rail Mounting and 100-pin SCSI II female connector (RoHS), include 1x CA-SCSI100-15 (SCSI II 100-pin & 100-pin Male connector cable 1.5m) I/O Connector Block (Pitch= 381 mm) with DIN-Rail Mounting and 100-pin SCSI II female connector (RoHS) 16-channel (ch17 ~ 32), relay wet contact 16-channel (ch1 ~ 16), relay wet contact Termination board for thermocouple module, up to 50V Termination board for HART analog input module Universal termination board for analog I/O (RoHS), up to 50V Termination board for RTD module (RoHS), up to 50V Termination board for digital input with high EMS protection and removable fuses (RoHS) Universal termination board for digital I/O (RoHS), up to 50V 8-channel Vibrating Wire extended board Universal Snap-on Termination Board, 50V max Termination board for digital output with high EMS protection and removable relay (Ch0 ~ 15) (RoHS) PI, Single/Dulex, 8ch Termination board for digital output with high EMS protection and removable relay (Ch16 ~ 31) (RoHS) 16 channel input terminals and 16 channel relay outputs board 4 Channels SSR Relay Module, DC type Manual-Pulsar-Generator(MPG) and FRnet input board for PISO-PS600 / VS600 / PMDK 2 Pole, 20 A Step relays for direct 35 mm rail (EN 50022) mounting 2 Pole, 16 A Step relays for direct 35 mm rail (EN 50022) mounting Photo-isolated terminal board for ICPDAS 3-axis stepper/servo controller for Mitsubishi servo J2 Amplifier Daughter board (wiring terminal board) for FUJI motor driver, Din-Rail mountable ROHS 24 Channels DC Isolated Digital Output Daughter Board, Opto-22 Compatible, DIN-Rail Mounting 16 Channels Input Terminal and 16 Channel Relay Output, incl. CA-3710D Male- Male D-sub Cable 1.0M, DIN-Rail Mounting Isolated 16 Channels AC/DC & 8 Channels Form C Relay Digital Daughter Board, Cable CA-3710 1m, DIN-Rail Mounting Isolated 16 Channels AC/DC & 8 Channels Form C Relay Digital Daughter Board, Cable CA-3710 1m 24 Channels Solid State Relay Daughter Board, Opto-22 Compatible, DC 24 Channels Solid State Relay Daughter Board, Opto-22 Compatible, DC Photo-isolated Termination Board for Motion Control Adapters PISO-PS4000 and I-8094 16 Channels Input Terminal and 16 Channel Relay Output, incl. CA-3710D Male- Male D-sub Cable 1.0M 24 Channels Form C Relay (12V) Daughter Board, Opto-22 Compatible, DIN-Rail Mounted 24 Channels Form C Relay (24V) Daughter Board, Opto-22 Compatible, DIN-Rail Mounted 2x20-pin Connector Termination Board (Pitch 3.81mm), DIN-Rail Mounting 24 Channels Power Relay (12V) Daughter Board, Opto-22 Compatible, DIN-Rail Mounting Screw Terminal Board for PISO-DA2, DIN-Rail Mounting DB-37 Connector Termination Board (Pitch 3.81mm), DIN-Rail Mounting DB-37 Connector Termination Board, DIN-Rail Mounting, up to 50V 32-Channel Relay Output Board with Cable, up to 50V 2xDB-9 Connector Termination Board, DIN-Rail Mounting, 50V max Termination Board for Motion Control Adapters PISO-PS4000 and I-8094, up to 50V 32-channel relay output board with CA-3710D Male-Male D-sub Cable 1m, RoHS Termination Board for Yaskawa Termination Board for Delta ASDA A Termination Board for Panasonic DB-37 Connector Termination Board, DIN-Rail Mounting, CA-3720(37-pin D-sub cable 1.0m) DB-37 Connector Termination Board, DN-37 Male-Female D-sub Cable 1M Cable(45°) 20-Way Jumper Link for RM-38 Power Relay Module, 16A, DIN-Rail Mounting (4 pcs) 18-Way Jumper Link for RM-48.61/62 Power Relay Module, 10A, DIN-Rail Mounting (4 pcs) DB-37 Connector Termination Board (Pitch 3.81mm), DIN-Rail Mounting, 50V 12 Channels Solid State Relay Daughter Board, Opto-22 Compatible 12 Channels Solid State Relay Daughter Board, Opto-22 Compatible, DIN-Rail Mounting IDC-50 Connector Termination Board (Pitch 3.81mm), DIN-Rail Mounting, up to 30V 12 Channels Solid State Relay Daughter Board, Opto-22 Compatible 12 Channels Solid State Relay Daughter Board, Opto-22 Compatible, DIN-Rail Mounting Screw Terminal Board for PISO-DA2 24 Channels Power Relay (12V) Daughter Board, Opto-22 Compatible, DIN-Rail Mounted Terminal Board for WDT-03 24 Channels AC/DC Isolated Digital Daughter Board, Opto-22 Compatible, DIN-Rail mounting Encoder input board for PISO-Encoder300/600 24 Channels DC Isolated Digital Output Daughter Board, Opto-22 Compatible Terminal Board, DB9 socket, DIN-Rail Mounting, 50V max Termination Board for Motion Control Adapters PISO-PS4000 and I-8094 Relay Interface Modules 1CO 6A, 5 pcs In One Package Photo-isolated terminal board for Mitsubishi J2 Series Amplifier Photo-isolated terminal board for Yaskawa Series Amplifier Photo-isolated terminal board for ICPDAS two-axis stepper/servo controller Photo-isolated terminal board for Panasonic minas A4 Series Amplifier Photo-isolated terminal board for Delta ASDA-A Type Motor Isolated 24 Channels Photo MOS Relay Daughter Board, Opto-22 Compatible 4 Channels Power Relay Module Isolated 24 Channels Open Collector Daughter Board, Opto-22 Compatible 24 Channels Form C Relay (12V) Daughter Board, Opto-22 Compatible, DB37 Connector, DIN-Rail Mounting 24 Channels Power Relay (12V) Daughter Board, Opto-22 Compatible, DB37 Connector, DIN-Rail Mounting 24 Channels Power Relay (12V) Daughter Board, Opto-22 Compatible, DB37 Connector 16 Channels Power Relay Module for DIN-Rail 24 Channels AC/DC Isolated Digital Daughter Board, Opto-22 Compatible 24 Channels Form C Relay (24V) Daughter Board, Opto-22 Compatible 4 Channels SSR Relay Module without DIN-Rail Mount 24 Channels Form C Relay (12V) Daughter Board, Opto-22 Compatible, DB37 Connector Isolated 24 Channels Open Collector Daughter Board, Opto-22 Compatible 24 Channels Power Relay (24V) Daughter Board, Opto-22 Compatible 24 Channels Solid State Relay Daughter Board, Opto-22 Compatible 24 Channels Form C Relay (12V) Daughter Board, Opto-22 Compatible 4 Channels Power Relay Module 24 Channels Form C Relay (24V) Daughter Board, Opto-22 Compatible, DB37 Connector, DIN-Rail Mounting 16 Channels Power Relay Module for DIN-Rail 8 Channels Power Relay Module for DIN-Rail 24 Channels Power Relay (24V) Daughter Board, Opto-22 Compatible, DB37 Connector 24 Channels Solid State Relay Daughter Board, Opto-22 Compatible, DIN-Rail Mounting Isolated 24 Channels Photo MOS Relay Daughter Board, Opto-22 Compatible, DIN-Rail Mounting 24 Channels Power Relay (12V) Daughter Board, Opto-22 Compatible 8 Channels Power Relay Module for DIN-Rail 24 Channels Form C Relay (24V) Daughter Board, Opto-22 Compatible, DB37 Connector 16 Channels Form C Relay Daughter Board 24 Channels Power Relay (24V) Daughter Board, Opto-22 Compatible, DB37 Connector, DIN-Rail Mounting 24 Channels AC/DC Isolated Digital Daughter Board, Opto-22 Compatible, DB37 Connector 24 Channels AC/DC Isolated Digital Daughter Board, Opto-22 Compatible, DB37 Connector, DIN-Rail Mounting 4 Channels SSR Relay Module for DIN-Rail 24 Channels Solid State Relay Daughter Board, Opto-22 Compatible Isolated 24 Channels Open Collector Daughter Board, Opto-22 Compatible, DIN-Rail Mounting Isolated 24 Channels Photo MOS Relay Daughter Board, Opto-22 Compatible 4 Channels Power Relay Module for DIN-Rail Isolated 24 Channels Open Collector Daughter Board, Opto-22 Compatible, DIN-Rail Mounting Isolated 24 Channels Photo MOS Relay Daughter Board, Opto-22 Compatible, DIN-Rail Mounting 16 Channels AC/DC Isolated Digital Daughter Board 4 Channels Power Relay Module for DIN-Rail Isolated 16 Channels AC/DC & 8 Channels Form C Relay Digital Daughter Board 24 Channels Solid State Relay Daughter Board, Opto-22 Compatible, DIN-Rail Mounting Isolated 16 Channels AC/DC & 8 Channels Form C Relay Digital Daughter Board, DIN-Rail Mounting Screw Terminal Board, 2xIDC-20 Connectors Screw Terminal Board with CJC Sensor, DB-37 Connector Screw Terminal Board, 2xIDC-20, DB-37 Connectors, Cable CA-3720, 1 m Screw Terminal Board with CJC Sensor, DB-37 Connector Screw Terminal Board, DB-37 Connector Screw Terminal Board with CJC Sensor, DB-37 Connector, DIN-Rail Mounting Screw Terminal Board with CJC Sensor, DB-37 Connector, DIN-Rail Mounting, up to 50V Screw Terminal Board, DB-37 Connector, 50V max DB-37 Male Direct Connection Screw Terminal Board, up to 50V Screw Terminal Board, DB-37 Connector IDC-50 Opto-22 to DB-37 PCI Adapter Screw Terminal Board, DB-37 Connector, 50V max 2xIDC-20 ISA Extender IDC-50 Opto-22 to DB-37 ISA Adapter Screw Terminal Board, DB-37 Connector, DIN-Rail Mounting, 50V max Screw Terminal Board, DB-37 Connector, DIN-Rail Mounting, 50V max 2xIDC-20 PCI Extender, up to 50V IDC-50 Opto-22 PCI Extender 2x20-pin Connector Termination Board DB-9, DB-25 Female Connector Termination Board IDC-50 Opto-22 ISA Extender 2x20-pin Connector Termination Board, DIN-Rail Mounting DB-9, DB-25 Female Connector Termination Board, DIN-Rail Mounting, up to 50V DB-37 Connector Termination Board, DIN-Rail Mounting IDC-50 Connector Termination Board, DIN-Rail Mounting, Include CA-5015(50-pin Flat Cable 1.5m), up to 30V DB-37 Connector Termination Board IDC-50 Connector Termination Board, up to 30V Multiplexer, 16 Analog Channels, CJC Encoder Interface Daughter Board for Servo-300 8 Relay Daughter Board for Servo-300 |